View profile

FUNshoot News - Spotting Scope Maintenance

FUNshoot News - Spotting Scope Maintenance
By FUNshoot News • Issue #31 • View online
A newsletter for the modern pafisto.
Please share and forward to your friends and on social media. Thank you!

Using A Spotting Scope
Using A Spotting Scope
Reader Comments
Regarding your article “Analysis ‘The only purpose of a gun is to kill’”: Statistics can be incredibly biased when presented in a verbally-structured, idealistic argument. Just spitting a statistic doesn’t tell an actual story. This would be like stating guns kill more people than polio. They do, but why? Because vaccines have almost eliminated the deadly disease polio. The statistic is still correct but the logic is flawed.
- Tommy Davis, Guns of All Kinds
Good point. I concede the number comparisons used in that article were overly simplistic. The idea was to compare firearms and automobiles by pointing out what the data says. While the numbers used are factual according to the CDC, as you point out, they don’t necessarily present the whole story.
Spotting Scope Maintenance
If you want to ensure that your spotting scope is in working order, simply cleaning the lens from time to time will do the trick. However, if you want your spotting scope to retain its reliability and quality, you’ll need to put some extra effort into it.
Routine check-ups
Whenever you are using your spotting scope, there’s a chance that something didn’t ‘click’ right as it should have. Placing it on a rocky surface might result in tiny cracks appearing here and there, that time you dropped it and thought it wasn’t a big deal might’ve been actually. Performing regular routine check-ups is the easiest way to find out if anything’s gone awry.
You should inspect each component separately, both the interior and the exterior of your scope. If there’s even the slightest damage on your spotting scope, you should fix it before you even consider using it again (so as to prevent smaller damages ‘evolving’ into major ones).
Disassembling your scope
In most cases you will be able to tell if a part of your scope isn’t functioning properly. However, routine check-ups sometimes give off the impression that everything’s alright while in fact, it isn’t.
The best way to make sure every little piece of your scope is functioning in the way it should be is to disassemble it before you get to the cleaning part. Take off the screws (and don’t forget to count them so you can re-assemble the scope later), remove the tube from its axis and use the following tools to help make the disassembly process easier:
  1. Cotton swabs are handy for dusty surfaces
  2. Soap or grease if some of the screws are screwed in too tightly
  3. Tweezers go a long way for the tiniest screws
  4. Magnetic screwdriver for the smallest screws
Cleaning the lens
A spotting scope lens is rather delicate. The special type of glass used in spotting scopes might or might not be durable, but the fastest way to damage it even if it’s robust as can be is by using hard brushes.
Using soft brushes and dry cleaning cloths will make a big difference. Furthermore, the method by which you clean the lens will have a huge impact on whether you’ll damage it or not. If you start from the very center and spiral towards the edges, you’re doing a good job.
Lastly, you should avoid applying too much pressure when you’re cleaning, even if there are some persistent stains on it. Exercise patience if you want to avoid damaging, or even breaking your spotting scope lens.
Cleaning the exterior surface
Cleaning the lens was the easy part. Cleaning the exterior surface is a bit trickier. There are so many small bits and pieces on your spotting scope, all of which are quite flimsy.
You will be able to spot lumps of debris, mud, and dirt, so you shouldn’t have any problems cleaning them with a piece of cloth. It’s highly recommended that you clean both interior and exterior of your scope before each use, but more importantly, make sure to clean it afterward as well.
If you’ve been using a piece of cloth to clean the exterior of your spotting scope without much success, it’s most likely that heavier debris got stuck onto it. Again, if you want to avoid doing damage to your scope, you shouldn’t apply too much pressure, so how should you deal with the persistent debris then?
There are various specialized cleaning products that were specifically made and intended for spotting scopes. Most of these ‘special’ cleaning tools are in liquid form, so they will be able to dissolve the debris and dirt that’s stuck on the exterior of your scope.
Proper storage
Regardless of how good of a job you did with disassembling, re-assembling, and cleaning your spotting scope, it would all go to waste if you don’t store it properly.
The spotting scope lens should be covered with a special type of cover (not too big, not too small), all the screws should be put back in place, and that’s about it as far as the mechanical parts are in question.
As for the ‘where should you store your spotting scope’, it mainly depends on your personal options. Some people don’t have a shed and others live in cramped apartments, so the general rule of thumb would be to keep it in an area that’s dry and humid-free. Obviously, moisture tends to be the biggest enemy of a lens, but it could also potentially do damage to the exterior, screws, and such.
Did you enjoy this issue?
FUNshoot News

FUNshoot News. Marksmanship and gunsmithing news and views.

In order to unsubscribe, click here.
If you were forwarded this newsletter and you like it, you can subscribe here.
Powered by Revue